Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Roswell
Heat pump installation in Roswell typically costs between $3,500 and $7,500, depending on the size of your home and whether your existing ductwork needs modification. Our crews install systems in Canton Street’s historic houses and in the brick ranches spread east of GA-400, and we show up inside the window we give you. We put the full price in writing before any work starts, and we stand behind the installation for a full year. Call (229) 537-2086 for a free estimate on a heat pump sized correctly for your Roswell home.
What makes Roswell different from Alpharetta or Duluth is the housing stock itself. A 1920s farmhouse near Canton Street and a 1980s two-story in a cul-de-sac both need heat pumps, but they need very different approaches to ductwork, airflow, and sizing. We know that before we ever park the truck.
Why Dalton Heating & Air Alpharetta Is Roswell’s Preferred Heat Pump Installation Company
We’re a Garrison Partners company, operating under The Garrison Standard since 2003. That means something concrete in Roswell: written pricing before any work begins, background-checked uniformed technicians on every call, and a 365-Day Done Right Promise on every install. If it’s not done right, we make it right. No fine print, no 30-day window.
Roswell homeowners tell us the same stories: a crew that never showed, a price that changed at the door, a heat pump that never quite dehumidified right. Marco Benitez runs our team with a simple rule: the price goes on paper first, the work gets done by the book, and the site gets left clean. That’s The Garrison Code, and every Dalton technician is bound to it.
Our Heat Pump Installation in Roswell customers call a live person when they phone us, 24/7. No voicemail queue. And when we schedule a Roswell job, we give you a real arrival window. Our trucks are dispatched from the Atlanta office, and Roswell is a regular run for our crews.
Styles & brands we work with
Heat Pump Maintenance in Roswell
Heat Pump Maintenance in Roswell means cleaning condenser coils that get hammered by pine pollen every spring, checking refrigerant charge, testing defrost boards, and catching failing capacitors before they leave you without cooling in August. A tune-up runs $80 – $200. Given Roswell’s humid summers and heavy pollen seasons, we recommend twice-a-year maintenance: once before cooling season, once before the mild winter heating load kicks in.
Seasonal Coil Cleaning and Pollen Defense
On rural lots with no wind shelter, condenser coils collect drifting pine pollen fast. That pollen clogs fins, raises head pressure, and forces the compressor to work harder than it should. A spring cleaning restores efficiency and prevents high-pressure limit trips on the hottest days.
Control Board and Surge Protection Checks
Summer thunderstorms in this part of Georgia send surges down rural service lines. We check the integrity of your control board and recommend a surge protector if the heat pump sits on a long electrical run. A fried board is a $400+ repair and a few days without cooling, and in Roswell’s July heat that’s a health risk, not an inconvenience.
Geothermal Heat Pump Installation in Roswell
Geothermal Heat Pump Installation in Roswell uses the stable temperature of the ground below your property to provide heating and cooling without an outdoor condenser unit. That’s a real advantage on rural Roswell lots where pine pollen, mowing debris, or lack of wind shelter can shorten an air-source unit’s life. A geothermal system costs more upfront than a standard heat pump installation, typically landing well above the $3,500 – $7,500 air-source range, with the long-term payoff in lower operating costs and no exposed outdoor coil to clean.
Rural Loop Field Options
For Roswell properties with enough acreage, a horizontal ground loop is often the most economical geothermal option. Smaller lots near Canton Street may need a vertical bore field. Either way, we handle the load calculation, the loop design, and the full installation. You get one written price.
Ductwork Retrofit for Older Homes
Geothermal systems move air through the same ducts as any other forced-air heat pump. In a 1920s farmhouse with undersized returns, that means the duct retrofit comes first. We won’t drop a geothermal unit onto ductwork that can’t move the air it needs. The blower and the ducts get sized together.
Trusted Brands We Service in Roswell
Our technicians are factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Roswell installs, we often recommend Lennox for tight-budget replacements and Daikin for humid-climate performance. Goodman and Rheem come up in conversation on rental properties and workshops. We stock common parts locally so a repair or install doesn’t wait on a parts truck from out of state. See our full Heat Pump Installation service page for how we approach equipment selection.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Roswell Homes
- Undersized ductwork in 1970s – 90s brick ranches. Many of these homes were built with duct runs sized for older, less demanding systems. A heat pump pushing 1,200 CFM against ducts that can only move 900 CFM will short-cycle, spike humidity, and shorten compressor life. We measure static pressure and correct the ductwork before we install.
- Gravity-furnace-era ducts in Canton Street homes. A 1920s farmhouse that was originally heated by gravity air movement often has returns that are too small for any modern heat pump. We correct return-air sizing and calibrate the blower to hit 0.5 inches of static pressure. Skip that step, and the system never stops hunting for setpoint.
- Pollen-clogged condenser coils on unsheltered rural lots. With no tree line or windbreak, outdoor coils collect pollen fast. If the install doesn’t include seasonal cleaning reminders and a coil guard strategy, the heat pump loses efficiency after one spring.
- Surge damage on long electrical runs. Rural Roswell properties often have long service drives and exposed power feeds. A thunderstorm surge fries control boards. We recommend surge protection on any rural install, and we check the existing panel before we connect a new heat pump.
Pricing for Heat Pump Installation in Roswell, GA
| Service | Price Range in Roswell |
|---|---|
| Heat pump tune-up | $80 – $200 |
| Heat pump installation | $3,500 – $7,500 |
| Heat pump repair | $150 – $650 |
Heat pump installation in Roswell runs $3,500 to $7,500. The range depends on system size, whether you need duct modifications, and whether you choose a standard air-source unit or a zoned mini-split approach for historic homes. A tune-up runs $80 – $200. Repairs fall between $150 and $650, though a burned-out control board after a thunderstorm lands at the higher end. Every quote is in writing before we start. Call (229) 537-2086 for a free estimate.
We never give a ballpark number that shifts at the door. The price Marco Benitez’s team writes down is the price you pay. That’s the whole point of The Garrison Standard.
We Also Serve Cities Near Roswell
We serve Alpharetta, Holly Springs, Duluth, and Clarkston in addition to Roswell. If you’re in one of those cities and need a heat pump installed or serviced, the same written-price guarantee and 365-day promise apply. Dispatch is coordinated from our Atlanta office, and we schedule specific arrival windows for every city in our service area.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Roswell
Yes, a properly sized heat pump will handle Roswell’s humidity, but only if the ductwork is corrected first. Historic Canton Street homes often have returns sized for gravity furnaces, not modern forced-air systems. We fix the returns, confirm the load calculation, and calibrate the blower for proper static pressure. Then the heat pump dehumidifies correctly. Call (229) 537-2086 for an exact quote on your home.
Pine pollen clogs condenser coil fins, raises head pressure, and drops efficiency. On a rural Roswell lot with no wind shelter, pollen collects fast and thick. We recommend spring coil cleanings and, on some properties, a coil guard. Without seasonal maintenance, the heat pump works harder and may trip its high-pressure limit in July. We include a maintenance plan option with every install.
Sometimes, but only if a load calculation is done first. A heat pump that’s too small labors under Georgia humidity, and one that’s too large short-cycles, leaving the space clammy and stressing the compressor. For most detached workshops, a properly sized mini-split beats tying into the house system. We measure the space and size the unit to the actual load. Call (229) 537-2086 and we’ll assess your outbuilding.
Heat pumps work well in Roswell winters. Most nights stay above freezing, and modern cold-climate heat pumps hold efficiency down into the 20s. Unless you live in a drafty historic home with significant envelope leaks, a furnace backup usually isn’t necessary. Electric heat strips built into the air handler handle rare cold snaps. We’ll tell you honestly if your house needs an auxiliary heat source.
Check the static pressure and return-air sizing. Many 1990s-era homes east of GA-400 have undersized returns, which choke airflow and cause short-cycling. Watch for humidity swings and rooms that never quite reach setpoint in summer. If the system runs constantly but doesn’t dehumidify, the ducts are likely the culprit, not the heat pump itself. We measure and correct this on every install. Call (229) 537-2086 for a free assessment.
Just off Canton Street, our crew installed a Daikin 3-ton heat pump in a 1920s farmhouse where the existing ductwork was originally sized for a gravity furnace. We used a manual load calculation to confirm 2.5 tons would suffice, then corrected return-air duct sizing and calibrated the blower motor to hit 0.5 inches of static pressure, solving chronic short-cycling and humidity swings the previous system could not handle.
Written by Marco Benitez, Owner at Dalton Heating & Air Alpharetta, serving Roswell and surrounding communities.